Setting a password – Epson 6100i User Manual

Page 68

Configuring the Projector

8. To display your screen logo when the A/V Mute button is

pressed, select

A/V Mute

and press

Enter

9. Select

Logo

and press

Enter

10. When you’re finished, press the

button on the remote

control to exit the menu system.

Setting a Password

Follow the steps below to set a password for the projector.

1. Press and hold down the

Freeze

button on the remote control

until you see the Password Protect menu:

2. Select

Password

and press

Enter

3. When you see the

Change the password?

message,

select

Yes

and press

Enter

4. Press and hold down the

Num

key on the remote control while

you use the numeric keypad to enter a 4-digit password.

The password will be displayed as

****

. After you enter the last

digit, a confirmation screen appears. Enter the password again.

5. After you are finished setting the password, press the

button to exit to the Password Protect menu.

Make a note of the password and keep it in a safe place in case you
forget it.

note

If a password has already
been set, you’re prompted for
a password when entering
the Password Protect menu.
To enter the password, see
“Starting the Projector with
a Password” on page 71.