Epson 6100i - Manual (Page 56)

56 Configuring the Projector
■ Resize (video)
Sets the image’s aspect ratio (ratio of width to height) to 4:3
for letterbox video content and to 16:9 for widescreen video
content.
3. When you’re finished, press Esc or Menu .
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to changing the
shape of the pointer.
1. Press the Menu button on the remote control, highlight
Settings , then press the Enter button to select the Settings menu.
2. Use the pointer button to highlight menu items, then press
the Enter button to select from any of the following options:
■ Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular when the projector is tilted up or down.
■ Operation Lock
In Full Lock mode, disables all of the projector’s buttons,
including the P Power button. In Partial Lock mode,
disables all of the projector’s buttons except the P Power
button. Changes to this setting take effect after you restart
the projector. (After you turn off the projector, wait for
the P Power light to turn solid orange before turning it
on again.)
note
To cancel the Operation
Lock function from the
projector, press the
Enter
button for about seven
seconds.