Epson 6100i - Manual (Page 39)

Projecting 39
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. Turn off and disconnect any equipment plugged into the
projector.
2. To turn off the projector, press the P Power button twice.
3. When the P Power light is steady orange, you can unplug the
projector.
With Epson’s exclusive Instant Off ™ technology, there’s no
cool-down period, so you can pack and go immediately after
turning off the projector.
note
When the projector has not
received any input signals
for 30 minutes, it
automatically turns off the
projector lamp and enters
“sleep mode.” This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the P
Power button.
If you are done using the
projector, unplug the power
cord. To turn off sleep mode,
see page 59.
Turn off this product when
not in use to prolong the life
of the projector.
Power button
caution
To avoid damaging the
projector or lamp, never
unplug the power cord when
the P Power light is green
or flashing orange.