Epson 6100i - Manual (Page 101)

Solving Problems 101
Viewing Lamp Usage and Other Information
Use the About menu to view information about the image source, the
display settings of your computer, and the number of hours the lamp
and filter has been used.
Press the Menu button, select Info , then press Enter .
You see the lamp and air filter usage hours and various input signal
settings on the right:
The lamp typically lasts from 2500 to 3000 hours, depending on the
selected Brightness Control setting (see page 57). If the number
shown is close to that, make sure you have a spare lamp handy. If
you’ve installed a new lamp, be sure to reset the lamp timer (see
page 95).
note
The information displayed
depends on the input signal
currently selected.
Lamp usage
Filter usage