Epson 6100i User Manual

Page 66

Text mode
Original mode

Configuring the Projector

3. Use the

pointer button to highlight

User’s Logo

, then press

the

Enter

button.

4. When you see the message

Choose this image as the User’s

Logo?

, select

Yes

and press

Enter

. A selection box displays over

the image.

5. Use the

pointer button on the remote control to select the

area of the image you want to use. Once you have selected the
area, press

Enter

6. When you see the message

Select this image?

, choose

Yes

and

press

Enter

If you want to change the area selected, select

, press

Enter

and

repeat steps 4 through 6.

note

If the User’s Logo Protect
function is enabled, you see
a message that the logo
cannot be recorded. You’ll
need to disable the User’s
Logo Protect function before
you can create or change the
User’s Logo. See page 69.