Connecting using a bnc-to-vga cable” o – Epson 6100i User Manual

Page 21

Setting Up the Projector

Connecting Using a BNC-to-VGA Cable

1. Locate a BNC-to-VGA video cable (one may be included with

your video equipment).

2. Connect the BNC end of the cable to your player and the VGA

end to the

Computer1

port on the projector.

3. If you want to play sound through the projector, see page 25 for

instructions on connecting an audio cable.

4. If you don’t need to make any other connections, see Chapter 2

or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.

5. Once the projector is turned on, enter the projector’s Signal menu

and make sure Computer1 is set to

Auto