Purdy AND190HW - Manual

O
PTOELECTRONICS
O
PTOELECTRONICS
O
PTOELECTRONICS
Purdy Electronics Corporation • 755 North Pastoria Avenue • Sunnyvale, CA 94085-2918
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
1 11/14/12
AND190HW
Ultra Bright LED Lamps: Type 1
AND190HW
InGaN High Brightness White Light Emission
T-1 Package (10 mm)
The series is designed for application required high luminous intensity. The phosphor filled
in the reflector converts the blue emission of InGaN chip to ideal white.
Features
• Popular T-1 colorless 10mm package
• High luminous power
• Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931
• Bulk, available taped on reel
• Pb free
• The product itself will remain within RoHS compliant version.
• RoHS compliant
Applications: outdoor displays, optical indicators, backlighting, marker lights
Maximum Ratings (Ta - 25 ºC)
Characteristic Symbol Rating Unit
Continuous Forward Current I
F
25 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
120 mW
Operating Temperature Range T
OPR
-30 ~ +85 ºC
Storage Temperature Range T
STG
-40 to 100 ºC
Soldering Temperature (T=5 sec) T
SOL
260 ± 5 ºC
Electrostatic Discharge ESD 150 V
Electro-Optical Characteristics (Ta = 25ºC)
Item Symbol Test Condition Minimum Typical Maxiumum Unit
Forward Voltage V
F
I
F
= 20 mA – 3.5 4.0 V
Reverse Current I
R
V
R
= 5 V – – 50
μ
A
Luminous Intensity I
V
I
F
= 20 mA 3,600 5,000 – mcd
Chromaticity Coordinates x I
F
= 20 mA – 0.29 – nm
y – 0.28 – nm
Viewing Angle 2 θ 1/2 I
F
= 20 mA – 10 – degree
Product specifications contained herein may be changed without prior notice.
I
Notes: Al dimensions are in millimeters, and tolerance is 0.25 mm except beign specified.
Lead spacing is measured where the lead emerges from the package. Protruded resin under
flange is 1.5mm Max. LED.