Purdy AND185HAP User Manual
And185hap, Features
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
• www.purdyelectronics.com
6/12/07
AND185HAP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g
Unit: mm
1.0±0.2
8.6±0.3
5.6±0.3
5.0±0.2
25.4 MIN.
0.5
1.0 MIN.
1. Anode
2. Cathode
0.5
2.54
1
2
Cathode Index
AND185HAP
InGaAlP High Brightness Amber Light
Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (
λ
p = 612 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive Use
Maximum Ratings (T
a
= 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
I
F
50
mA
Reverse Voltage
V
R
5
V
Power Dissipation
P
D
125
mW
Operating Temperature Range
T
Opr
-40 to 85
°C
Storage Temperature Range
T
Stg
-40 to 100
°C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
V
F
I
F
= 20 mA
–
2.0
2.4
V
Reverse Current
I
R
V
R
= 5 V
–
–
10
µA
Luminous Intensity
I
V
I
F
= 20 mA
8,500
11,150
–
mcd
Peak Emission Wavelength
λ
P
I
F
= 20 mA
–
612
–
nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA
–
17
–
nm
Dominant Wavelength
λ
d
I
F
= 20 mA
–
605
–
nm
Full Viewing Angle
θ
I
V
= 1/2 Peak
–
6
–
degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant