Purdy AND211RA - Manual

AND211RA
Standard Bright LED Lamps
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07
3.9(.154)
1.0 Max
0.5(0.2)
1.9(.075)
2.54(0.1)
7(.276)
27(1.063) Min
Cathode
1.5(.06)Typ
AND211RA
Special Shape
1.9mm x 3.9mm Rectangular
Features
• Low power requirement
• Special shape
• All plastic molded lens
• GaP – Red
• RoHS Compliant
Optical Characteristics (T = 25°C)
Part
Number
Color
Lens
Desc.
Axial Luminous
Intensity
(mcd)
Test
Condition
(I
F
–mA)
Viewing
Angle
2 θ 1/2
(deg)
LED Lens Min. Typ.
AND211RA Red Red Diffused 0.5 1.0 10 110
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Absolute Maximum Ratings (T
A
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F
25 mA
Reverse Voltage V
R 5 V
Power Dissipation P
D
120 mW
Operating Temperature T
Opr -40 to +85 °C
Storage Temperature Range T
Stg -40 to +85 °C
Electro-Optical Characteristics (T
A
= 25°C)
Characteristics Symbol Test Condition
AND211RA
(Red) Unit
Typ. Max.
Forward Voltage V
F
I
F
= 20mA 2.0 2.5 V
Reverse Current I
R
V
R
= 5V – 10 µA
Peak Emission Wavelength λ p I
F
= 20mA 700 – nm
Spectral Line Half Width λ I
F
= 20mA 45 – nm
Weight: 0.30 g Unit: mm
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.