Purdy AND208YGA - Manual

AND208YGA
Standard Bright LED Lamps
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07
Green Yellow or Red
2.54 2.54
2.0 Typ
5.0 ± 0.2
4.0 ± 0.2
2.0 ± 0.2
1 Max
4.0 ± 0.2
9.7
±
0.2
24.5 Min
0.5
4.0 Typ
Common Cathode
AND208YGA
Dual Color
2mm x 5mm Rectangular
Features
• All plastic mold type
• Low drive current, (forward current = 10 – 15 mA)
• Fast response time, capable of pulse operation
• Viewing Angle: 110°
Optical Characteristics (T = 25°C)
Part
Number
Source
Color
Lens
Desc.
Luminous Intensity
@ 20 mA
(mcd)
Emitting Lens Min. Typ.
AND208YGA
GaAsP/GaP Yellow White Diffused 8 14
GaP Green White Diffused 8 14
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Absolute Maximum Ratings (T
A
= 25°C)
Characteristics Symbol
Rating
Unit GaP
(Green)
GaAsP/GaP
(Yellow)
Forward Current I
F
25 30 mA
Reverse Voltage V
R
5 5 V
Power Dissipation P
D
105 105 Total Package
Operating Temperature T
Opr -40 to +85
-40 to +85 °C
Storage Temperature Range T
Stg
°C
Electro-Optical Characteristics (T
A
= 25°C)
Characteristics Symbol Test Condition
Rating
Unit
GaP
(Green)
GaAsP/GaP
(Yellow)
Typ. Max. Typ. Max.
Forward Voltage V
F
I
F
= 20mA 2.2 2.5 2.1 2.5 V
Reverse Current I
R
V
R
= 5 V – 10 – 10 µA
Peak Emission Wavelength λ p I
F
= 20mA 565 – 590 – nm
Spectral Line Half Width λ I
F
= 20mA 30 – 35 – nm
Weight: 0.38 g Unit: mm
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the
design of equipment incorporating this product.
• RoHS Compliant