Purdy AND2451RGL - Manual

Standard Bright LED Lamps
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
26 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1/5/98
Red
Cathode
Green
Cathode
5.33
4.85
1.0
±
0.2
22.5 Min
1.5
1.0 Max
2.54
± 0.06
0.5 square x 2
5.84
±
.15
8.64
± 0.25
AND2451RGL
Dual Color
5.0mm Round Bi-Color, Bi-Polar Lamp
Features
• Dual color indicator: Red/Green
• Two leads
• Low drive current
• Wide viewing angle: 120°
Optical Characteristics (T = 25°C)
Part
Number
Source
Color
Lens
Desc.
Luminous Intensity
@ 10 mA
(mcd)
Emitting Lens Min. Typ.
AND2451RGL
GaAsP/GaP Red White Diffused 0.7 1.2
GaP Green White Diffused 0.8 2.7
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Absolute Maximum Ratings (T
A
= 25°C)
Characteristics Symbol
Rating
Unit GaAsP/GaP
(Red)
GaP
(Green)
Forward Current I
F
20 20 mA
Reverse Voltage V
R
5 5 V
Power Dissipation P
D
70 70 mW
Operating Temperature T
Opr
-25 to +85 °C
Storage Temperature Range T
Stg
-25 to +100 °C
Electro-Optical Characteristics (T
A
= 25°C)
Characteristics Symbol Test Condition
Rating
Unit
GaAsP/GaP
(Red)
GaP
(Green)
Typ. Max. Typ. Max.
Forward Voltage V
F
I
F
= 10mA 2.1 3.0 2.1 3.0 V
Reverse Current I
R
V
R
= 5 V – 100 – 100 µA
Peak Emission Wavelength λ p I
F
= 10mA 700 – 567 – nm
Spectral Line Half Width λ I
F
= 10mA 100 – 25 – nm
Weight: 0.31 g Unit: mm