Purdy AND233CRP - Manual

Ultra Bright LED Lamps: Type 1
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
42 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1/5/98
(9.35)
9.85 max
2.5
± 0.2
5.0
±
0.2
20
± 1
(2)
1. Anode
2. Cathode
0.5
2.54
1 2
AND233CRP
GaAlAs Red Light Emission
Special Shape Package
Features
• 2.5 x 5 mm arch lens
• Peak wavelength (
λ
p = 660 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• Suitable for: level meter, safety equipment, automotive use
Maximum Ratings (T = 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F
50 mA
Reverse Voltage V
R 4 V
Power Dissipation P
D 125 mW
Operating Temperature Range T
Opr
-20 to 75 °C
Storage Temperature Range T
Stg
-30 to 100 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 3 sec. max
Soldering portion of lead: up to 2 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T = 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 1.85 2.2 V
Reverse Current I
R
V
R
= 4 V – – 100 µA
Luminous Intensity I
V
I
F
= 20 mA 320 800 – mcd
Peak Emission Wavelength l
P
I
F
= 20 mA – 660 – nm
Spectral Line Half Width ∆ λ I
F
= 20 mA – 25 – nm
Dominant Wavelength λ
d I
F
= 20 mA – 640 – nm
Full Viewing Angle θ I
V
= 1/2 Peak – 15 – degree
Weight: 0.23 g Unit: mm