Purdy AND190HYP User Manual
And190hyp, Features
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
• www.purdyelectronics.com
7/18/07
AND190HYP
Ultra Bright LED Lamps: Type 3
Weight 1.0g
Unit: mm
1.0 MIN
2.0
±
0.2
13.5
±
0.3
11.0
±
0.3
10.0
±0.2
Cathode Index
26.4 MIN.
1. Anode
2. Cathode
0.5
0.5
2.54
1
2
AND190HYP
InGaAlP High Brightness Yellow Light Emission
T-3 Package (10 mm)
Features
• New emission material (InGaAlP) yellow LED
• Peak wavelength (lp = 590 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 2 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
Maximum Ratings (T
a
= 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
I
F
50
mA
Reverse Voltage
V
R
5
V
Power Dissipation
P
D
125
mW
Operating Temperature Range
T
Opr
-40 to 85
°C
Storage Temperature Range
T
Stg
-40 to 100
°C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
V
F
I
F
= 20 mA
–
2.1
2.8
V
Reverse Current
I
R
V
R
= 4 V
–
–
50
µA
Luminous Intensity
I
V
I
F
= 20 mA
4,500
6,300
–
mcd
Peak Emission Wavelength
l
P
I
F
= 20 mA
–
590
–
nm
Spectral Line Half Width
∆l
I
F
= 20 mA
–
15
–
nm
Dominant Wavelength
ld
I
F
= 20 mA
–
587
–
nm
Full Viewing Angle
q
I
V
= 1/2 Peak
–
6
–
degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant