Purdy AND2307 Series - Manual

LED Displays
O
PTOELECTRONICS
O
PTOELECTRONICS
O
PTOELECTRONICS
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07
B F
A
C
G
41.5
25.75
5.5ø
No. 5
3.5 min.
DP
2.54 X 4 = 10.16
All Pin
5 No. 1
0.5
1.0
12.0
60.0
28.5
D
E
47.76
28.5
70.0
E D C B A
1 5
F G DP
AND-2307 Series
GaAsP/GaP–Red; GaP–Green
7 Segment, Large Size; 2.3 Inch
Features
• Large size—7 segment displays
• Available in red or green
• Suitable for large size displays for distance viewing;
across-the-building status displays
• Available in both common cathode and common anode
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead
forming.
Description
Size
Number
of Digits
Common Color
Number
of Pins
Cathode Anode Display Face
2.3 inch 1 AND-2307SCL AND-2307SAL Red Red 10
2.3 inch 1 AND-2307GCL AND-2307GAL Green Gray 10
Absolute Maximum Ratings (T = 25°C)
Characteristics Symbol Rating Unit
DC Forward Current/Segment I
F
(DC)/SEG 30 mA
Reverse Voltage/Segment V
R
3 (Red), 5 (Green) V
Operating Temperature Range T
Opr
-25 to 85 °C
Storage Temperature Range T
Stg
-25 to 100 °C
Electro-Optical Characteristics (T = 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage/Segment V
F
I
F
= 20 mA – 8.4 12.0 V
Forward Voltage/D.P. V
F
I
F
= 10 mA – 4.2 6.0 V
Reverse Current I
R
V
R
= 3 (Red), 5 (Green) – – 100 µA
Luminous Intensity
Per Segment
Red I
V
I
F
= 10 mA 4.7 7.8 – mcd
Green I
V
I
F
= 10 mA 4.1 6.8 – mcd
Peak Emission
Wavelength
Red λ
P
I
F
= 10 mA – 635 – nm
Green
λ
P
I
F
= 10 mA – 567 – nm
Spectral Line
Half Width Red ∆ λ I
F
= 10 mA – 40 – nm
Green ∆ λ I
F
= 10 mA – 30 – nm
Unit: mm
Product specifications contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
• RoHS Compliant