Purdy AND205YA - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07
AND205YA
Standard Bright LED Lamps
5(.197)
1.0 Max
0.5(0.2)
2.54(0.1)
8.4 (.331)
4(.157)
27(1.063) Min
Cathode
1.5(.06)Typ
2.8(0.11)
1(.04)
AND205YA
Special Shape
1mm x 5mm Rectangular
Features
• Low power requirement
• Special shape
• All plastic molded lens
• GaAsP – Yellow
• RoHS Compliant
Optical Characteristics (T = 25°C)
Part
Number
Color
Lens
Desc.
Axial
Luminous
Intensity
(mcd)
Test
Condition
(I
F
–mA)
Viewing
Angle
2 θ 1/2
(deg)
LED Lens Min. Typ.
AND205YA Yellow Yellow Diffused 2.0 4.0 10 110
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Absolute Maximum Ratings (T
A
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F
30 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
105 mW
Operating Temperature T
Opr
-40 to +85 °C
Storage Temperature Range T
Stg
-40 to +85 °C
Electro-Optical Characteristics (T
A
= 25°C)
Characteristics Symbol Test Condition
AND205YA
(Yellow) Unit
Typ. Max.
Forward Voltage V
F
I
F
= 20mA 2.1 2.5 V
Reverse Current I
R
V
R
= 5 V – 10 µA
Peak Emission Wavelength λ p I
F
= 20mA 590 – nm
Spectral Line Half Width λ I
F
= 20mA 35 – nm
Weight: 0.30 g Unit: mm
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.