Purdy AND114Y-YP - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/18/07 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] 1
www.purdyelectronics.com
AND114Y/YP
Standard Bright LED LAMPS
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition
Yellow
Unit
Min. Typ. Max.
Forward Voltage V
F
I
F
= 20mA – 2.1 2.5 V
Reverse Current I
R
V
R
= 5 V – – 10 µA
Peak Emission Wavelength λ p I
F
= 15mA – 590 – nm
Spectral Line Half Width λ I
F
= 15mA – 35 – nm
Weight: 0:30 g Unit: mm
2.5 max including resin
7.6
(1)
ш5.8
± 0.2
ш5.0 ± 0.2
26.5
1.5
0.5
0.5
1. Anode
2. Cathode
2.54
2 1
Cathode Index
AND114YP
AND114Y
2.5 max including resin
12.75
± 0.5
(1)
7.6
ш5.8
± 0.2
ш5.0 ± 0.2
21.1
1.5
0.5
0.5
1. Anode
2. Cathode
2.54
2 1
Cathode Index
Cathode
Index
AND114Y/YP
Standard LED
T-1 3/4 Package (5 mm)
Features
• Low power requirement
• Flush-mount
• All plastic molded lens
• Color: GaAsP–Yellow
Optical Characteristics (T
a
= 25°C)
Color
Lens
Desc.
Axial Luminous
Intensity (mcd)
Test
Condition
(I
F
–mA)
Viewing
Angle
2 θ 1/2
(deg)
LED Lens Min. Typ.
Yellow Yellow Diffused 5 18 10 60
Absolute Maximum Ratings (T
a
= 25°C)
Characteristics Symbol
Rating
(Yellow)
Unit
Forward Current (DC) I
F
30 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
105 mW
Operating Temperature T
Opr
-40 to +85 °C
Storage Temperature Range T
Stg
-40 to +85 °C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
• RoHS Compliant