Purdy AND190HBA User Manual
And190hba, Features
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
• www.purdyelectronics.com
7/18/07
AND190HBA
Ultra Bright LED Lamps: Type 3
Weight: 1.0g
Unit: mm
2.0
±
0.2
13.5
±
0.3
11.0
±
0.3
10.0
±0.2
25.4 MIN.
1.0 MIN.
1. Anode
2. Cathode
1 2
Cathode Index
0.5
2.54
0.5
AND190HBA
GaN High Brightness Blue Light Emission
T-3 Package (10 mm)
Features
• New emission material (GaN) blue LED
• Peak wavelength (
λ
p = 430 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 1 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive Use
Maximum Ratings (T
a
= 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
I
F
30
mA
Reverse Voltage
V
R
5
V
Power Dissipation
P
D
125
mW
Operating Temperature Range
T
Opr
-40 to 85
°C
Storage Temperature Range
T
Stg
-40 to 100
°C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
3. Absolute secure counter measures against static electricity and surge should be taken when handling these
products. It is recommended to use wrist band or antistatic gloves when handling these LEDs.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
V
F
I
F
= 20 mA
–
3.8
4.5
V
Reverse Current
I
R
V
R
= 5 V
–
–
10
µA
Luminous Intensity
I
V
I
F
= 20 mA
1,000
1,500
–
mcd
Peak Emission Wavelength
λ
P
I
F
= 20 mA
–
430
–
nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA
–
65
–
nm
Dominant Wavelength
λ
d
I
F
= 20 mA
–
466
–
nm
Full Viewing Angle
θ
I
V
= 1/2 Peak
–
10
–
degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant