Purdy AND262HW - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3/30/09
AND262HW
Ultra Bright LED Lamps
Package Dimensions Unit: mm
AND262HW
InGaN High Brightness White Light Emission
• 3 mm (T-1) Package
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity
• High reliability
• RoHS Compliant
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F 25 mA
Peak Forward Current (Duty 1/10@1KHz) I
FP 100 ,A
Reverse Voltage V
R
5 V
Power Dissipation P
D
100 mW
Operating Temperature Range T
Opr
-40 to 85 ºC
Storage Temperature Range T
Sig
-40 to 100 ºC
Soldering Temperature (T=5 sec) T
SOL
260 ± 5 ºC
Electrostatic Discharge ESD 4K V
Precaution
Please be careful of the following:
Absolute secure counter measures against static electricity and surge should be taken when handling theses proce-
dures. It is recommended to use wrist band or antistatic gloves when handling these LEDs.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 3.5 4.0 V
Reverse Current I
R
V
R
= 5V – – 50 µA
Luminous Intensity I
V
I
F
= 20 mA 1800 2250 – mcd
Wavelength = 550 nm
Chromaticity Coordinates
x I
F
= 10 mA – 0.29 –
y I
F
= 10 mA – 0.28 –
Full Viewing Angle θ I
V
= 1/2 Peak – 35 – degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.