Purdy AND420HWA - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 10/16/07
AND420HWA
Ultra Bright LED Lamps
Weight: 0.31g Unit: mm
1.0 MIN.
1.0±0.2
8.6±0.3
5.9±.0.3
5.0±0.2
24.0 MIN.
0.5
1.5 Max
1
2
2.54
1
2
Anode
Cathode
+ -
AND420HWA
InGaN High Brightness White Light Emission
• 5 mm (T1-3/4) Package
• Fluorescence Type
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity – suitable for LCD Backlights, OA Equipment and
Automomotive Equipment
• High reliability
• Pb Free - RoHS Compliant
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current IF 30 mA
Reverse Voltage VR 5 V
Peak Forward Current
(Duty Cycle 1/10@ 1KHz)
IF
P
100 mA
Power Dissipation P
d 100 mW
Operating Temperature T
op -40 to +85 °C
Storage Temperature T
stg
-40 to
+100
°C
Soldering Temperature (5sec) T
sol
260 +/- 5 °C
Electrostatic Discharge ESD 4,000 V
Zener Reverse Current I
z
100 mA
Precaution
The products are sensitive to static electricity and care must be taken when handling products.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage VF IF = 20 mA – 3.5 4.3 V
Reverse Current IR VR = 5 V – – 50 µA
Luminous Intensity Iv IF = 20 mA 2,500 3,500 – mcd
Full Viewing Angle 2 θ 1/2 IF = 20 mA – 15 – degrees
Chromaticity Coordinates
X – – 0.29 –
Y – – 0.30 –
Zener Reverse Voltage V
z
I
z
= 5 mA 5.8 – – V
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.