Purdy AND113S - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
6/14/07 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] 1
www.purdyelectronics.com
AND113S Standard LED
Standard Bright LED LAMPS
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition
Yellow
Unit
Min. Typ. Max.
Forward Voltage V
F
I
F
= 20mA – 2.0 2.5 V
Reverse Current I
R
V
R
= 5 V – – 10 µA
Peak Emission Wavelength λ p I
F
= 15mA – 625 – nm
Spectral Line Half Width λ I
F
= 15mA – 45 – nm
Weight: 0:30 g Unit: mm
2.5 max including resin
12.75
± 0.5
(1)
7.6
ш5.8
±
0.2
ш5.0 ± 0.2
21.1
1.5
0.5
0.5
1. Anode
2. Cathode
2.54
2 1
Cathode Index
Cathode
Index
AND113S
Standard LED
T-1 3/4 Package (5 mm)
Features
• Low power requirement
• Flush-mount
• All plastic molded lens
• Color: GaAsP–Red
Optical Characteristics (T
a
= 25°C)
Color
Lens
Desc.
Axial Luminous
Intensity (mcd)
Test
Condition
(I
F
–mA)
Viewing
Angle
2 θ 1/2
(deg) LED Lens Min. Typ.
Red Red Clear 50 150 10 30
Absolute Maximum Ratings (T
a
= 25°C)
Characteristics Symbol
Rating
(Yellow)
Unit
Forward Current (DC) I
F
30 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D 105 mW
Operating Temperature T
Opr -40 to +85 °C
Storage Temperature Range T
Stg -40 to +85 °C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant