Purdy AND180CRP-B - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6-1-
AND180CRP-B
Ultra Bright LED Lamps: Type 1
Weight: 0.31 g Unit: mm
1.0
±
0.2
8.6
±
0.3
5.6
±
0.3
5.0 ± 0.2
26.4 MIN.
0.5
1.0 MIN.
1. Anode
2. Cathode
0.5
2.54
1 2
Cathode Index
AND180CRP-B
GaAlAs Red Light Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength ( λ p = 660 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 20 mA for outdoor applications
0.5 mA for indoor applications
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• Suitable for Outdoor Message Signboards
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F
0 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
5 mW
Operating Temperature Range T
Opr
-40 to 85 °C
Storage Temperature Range T
Stg
-40 to 100 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.1 2. V
Reverse Current I
R
V
R
= 4 V – – 10 µA
Luminous Intensity I
V
I
F
= 20 mA 2,000 3,600 – mcd
Peak Emission Wavelength l
P
I
F
= 20 mA – 660 – nm
Spectral Line Half Width ∆ λ I
F
= 20 mA – 20 – nm
Dominant Wavelength λ d I
F
= 20 mA – 640 – nm
Full Viewing Angle θ I
V
= 1/2 Peak – 12 – degree