Purdy AND5G User Manual
And5g, Features
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
7/18/07
www.purdyelectronics.com
AND5G
Ultra Bright LED Lamps
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
V
F
I
F
= 20 mA
–
2.1
2.4
V
Reverse Current
I
R
V
R
= 4 V
–
–
100
µA
Luminous Intensity
I
V
I
F
= 20 mA
70
120
–
mcd
Peak Emission Wavelength
l
P
I
F
= 20 mA
–
570
–
nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA
–
30
–
nm
Dominant Wavelength
λ
d
I
F
= 20 mA
–
571
–
nm
Full Viewing Angle
θ
I
V
= 1/2 Peak
–
30
–
degree
more than 2 min.
230
°C max.
140 - 160
°C
Temperature
10 sec. max.
Time
4
°C/sec.
max.
2.5
2.0
2.5
2.5
Reflow
The following soldering patterns are
recommended for reflow soldering
Weight: 2.0
Unit: mm
Cathode Index
ø1.8±0.1
2.0
2.4±0.1
0.5±0.1
2.5±0.2
2.2±0.1
3.2±0.2
Polarity
0.5±0.1
R0.9±0.1
AND5G
GaP Ultra Bright Green Light Emission
Surface Mount Package
Features
• Small package size with dome lens
• 3.2 (l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• Recommended Forward Current: 10 mA
Maximum Ratings (T
a
= 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
I
F
30
mA
Reverse Voltage
V
R
4
V
Power Dissipation
P
D
100
mW
Operating Temperature Range
T
Opr
-30 to 85
°C
Storage Temperature Range
T
Stg
-30to 90
°C
Product specifications contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
• RoHS Compliant