Purdy AND124G - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/18/07 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] 1
www.purdyelectronics.com
AND124G
Standard Bright LED LAMPS
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead
forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition
Green
Unit
Min. Typ. Max.
Forward Voltage V
F
I
F
= 20mA – 2.1 2.5 V
Reverse Current I
R
V
R
= 5 V – – 10 µA
Peak Emission Wavelength λ p I
F
= 15mA – 565 – nm
Spectral Line Half Width λ I
F
= 15mA – 30 – nm
Weight: 0:30 g Unit: mm
2.1 max
5.0
25.5
1.0
4
.0
ø3.1 ± 0.2
1.5
1.5
0.5
0.5
0.5
1. Anode
2. Cathode
2.54
2 1
ø3.8 ± 0.2
AND124G
Standard LED
T-1 Package (3 mm)
Features
• Low power requirement
• Stand-off or flush-mount
• All plastic molded lens
• Color: GaP–Green
Optical Characteristics (T
a
= 25°C)
Part
Number
Color
Lens
Desc.
Axial Luminous
Intensity (mcd)
Test
Condition
(I
F
–mA)
Viewing
Angle
2 θ 1/2
(deg) LED Lens Min. Typ.
AND124G Green Green Diffused 8 20 10 60
Absolute Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current (DC) I
F
25 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
105 mW
Operating Temperature T
Opr
-40 to +85 °C
Storage Temperature Range T
Stg
-40 to +85 °C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant