Purdy AND157HGP - Manual

O
PTOELECTRONICS
O
PTOELECTRONICS
O
PTOELECTRONICS
Purdy Electronics Corporation • 755 North Pastoria Avenue • Sunnyvale, CA 94085-2918
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
1 9/4/12
AND157HGP
Ultra Bright LED Lamps
AND157HGP
InGaAIP High Brightness Green Light Emission
T-1 3/4 Package (5mm)
Features
• High Efficiency
• Viewing Angle: 20 degrees
• All plstic mold type, clear colorless lens
• Peak Wavelength: λp - 575 nm)
• ESD-withstand voltage: up to 2KV
• RoHS compliant
Applications: Outdoor displays, status indicators, backlighting, commercial use
Maximum Ratings (Ta - 25 ºC)
Characteristic Symbol Rating Unit
Continuous Forward Current I
F
25 mA
Reverse Voltage V
R
5 V
Peak Forward Current (Pulse Width
<100 μs, Duty Cycle < 1%)
IF
P
100 mA
Power Dissipation P
D
60 mW
Operating Temperature Range T
OPR
-40 to 85 ºC
Storage Temperature Range T
STG
-40 to 100 ºC
Soldering Temperature (time<5 sec.) T
SOL
260 ºC
Electrostatic Discharge ESD 2,000 V
Zener Reverse Current I
Z
100 mA
Electro-Optical Characteristics (Ta = 25ºC)
Item Symbol Test Condition Minimum Typical Maxiumum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.0 2.4 V
Reverse Current I
R
V
R
= 5 V – – 10 μ A
Luminous Intensity I
V
I
F
= 20 mA 630 1,250 – mcd
Viewing Angle
2 θ 1/2
I
F
= 20 mA – 20 – degrees
Peak Emission Wavelength λ R
I
F
= 20 mA – 575 – nm
Spectrum Radiation Bandwidth λ D
I
F
= 20 mA – 573 – nm
Dominant Wavelength Δλ I
F
= 20 mA – 20 – nm
Product specifications contained herein may be changed without prior notice.
I
Weight: 0.31g Unit: mm
Precaution
Please be careful of the following:
1. Soldering temperature: 260 ºC max., Soldering time: 5 sec. max.
Soldering portion of lead: up to 1.6 mm from the body of the device.