Reception – TA Triumph-Adler P-C3065 MFP User Manual
Page 144
8-7
Fax Settings > Default fax settings
Reception
ECM TX
Set whether ECM TX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value
: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than
when [Off] is selected.
TX Start Speed
Set the TX Start Speed.
When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
Value
: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Item
Description
FAX Media Type
Specify the paper type to be used for print output of the received fax.
Value
: All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond, Cardstock, Color,
Envelope, Thick, Coated, High Quality, Custom 1-8
Media Type for Print Output (page 4-7)
RX Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of
pages on the top of each page when the message is printed out. It is useful for confirming the
time of reception if the fax is from a different time zone.
Value
: Off, On
Duplex Printing
When received multiple pages of data are the same width, they can be printed out on both
sides of paper having the same width as the data.
Value
: Off, On
2 in 1 Printing
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the
original at a time on one Letter or A4 size sheet of paper.
Value
: Off, On
Batch Print
When a multi-page fax is received, the pages are printed in a batch after all pages are received.
If [Off] is set, each page is printed as it is received.
Value
: Off, On
Rings(Normal)
If the reception method is fax automatic reception, the number of rings until the machine
answers a call can be changed as needed.
Value
: 1 - 15
Rings(TAD)
If the reception method is FAX/Answering Machine Auto Switch Reception, the number of rings
until the machine answers a call can be changed as needed.
Value
: 1 - 15
Item
Description