TA Triumph-Adler DC 2045 - Manual (Page 64)

Section 5 OTHER CONVENIENT FUNCTIONS
5-22
10. Making booklets from sheet originals [Booklet/Stitching mode]
With this mode, you can use 1-sided or 2-sided originals to make
open-faced, two-sided copies in such a way that the finished copies
can be stacked and folded into a booklet format. You can also select
to have color paper or relatively thick paper fed as front and/or back
covers to the copy sets.
NOTES
Inch specifications
• Only 11" x 8
1/2 " size originals and 8 1/2 "x 11", 8 1/2 " x 14" and
11" x 17" size copy paper can be used in this mode.
• It is possible for you to change the drawer[cassette] that will be used
to feed the cover sheets. (See “Cover drawer[cassette]” on page 7-
45.)
Metric specifications
• Only A4 size originals and A4R, B4 and A3 size copy paper can be
used in this mode.
• It is possible for you to change the drawer[cassette] that will be used
to feed the cover sheets. (See “Cover drawer[cassette]” on page 7-
45.)
1 If “Left” is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of the
finished copies read from left to right.
2 If “Right” is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of the
finished copies read from right to left.
3 If “Top” is selected as the binding direction :
Copying will be performed so that the stacked and folded pages of the
finished copies read from top to bottom.
4 It is possible for you to select whether or not to copy onto the
front and/or back cover sheets.
Front cover Back cover
Do NOT copy
Copy on outside
Copy on inside
Copy on both sides
NOTES
• The asterisk “ ” indicates the side of the cover on which copying
will be accomplished.
• The illustrations above are an example of when “Left” is selected as
the binding direction.
b
b
a
a
8
7
6
5
4
3
2
1
7
8
6
5
2 3
1
4
2
1
3
4
7 6
8
5
2
1
2
1
3
4
7
6
8 5
8
7
6
5
4
3
2
1