TA Triumph-Adler DC 2045 - Manual (Page 156)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-22
(3) Making machine default settings
Perform the following procedure that corresponds to the desired
setting.
● Auto drawer[cassette] switching ON/OFF
Perform the following procedure to turn automatic drawer[cassette]
switching ON or OFF, as desired.
1 Display the “Machine default” screen.
(See “(2) Accessing the machine default settings” on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
Form
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
Form
2 Select “Auto drawer switching” [“Auto drawer[cassette]
switching”] in the settings list on the left side of the touch
panel and then touch the “Change #” key.The “Auto drawer
switching” [“Auto drawer[cassette] switching”] screen will be
displayed.
Inch specifications
Default setting
Machine default
Auto drawer switching
Paper size(1st drawer)
Paper size(2nd drawer)
Paper type(1st drawer)
Paper type(2nd drawer)
On / All types of paper
Auto
Auto
Plain
Plain
Default menu
Down
Change #
Close
Setting mode
Up
Default setting
Metric specifications
Default setting
Machine default
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper type (1st cassette)
Paper type (2nd cassette)
On / All types of paper
A4
A4
Plain
Plain
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3 Touch the “On” key to automatic drawer[cassette] switching
ON.
Inch specifications
Auto drawer switching Back Close
When paper drawer is empty, switch to another one,
set same size/direction paper, and continue copying.
All types
of paper
Feed same
paper type
Default setting - Machine default
Function Paper type
Off
On
Metric specifications
Auto cassette switching
When paper cassette is empty, switch to another one,
set same size/direction paper, and continue copying.
Default setting - Machine default
Back Close
Function Paper type
All types
of Paper
Feed same
paper type
Off
On
4 In order to prevent a drawer[cassette] that holds a different
type of paper from being switched to when the automatic
drawer[cassette] switching function is turned ON, touch the
“Feed same paper type” key under “Paper type”.
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
5 Touch the “Close” key. The touch panel will return to the
screen in step 2.
6 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
7 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.