TA Triumph-Adler DC 2045 - Manual (Page 153)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-19
Default setting
Paper type
(drawer[cassette] No.1 -
No. 5)
Custom paper type for
2-sided copying
Auto shut-off time
Auto preheat time
Copy eject location
Touch panel sound ON/
OFF
Silent mode ON/OFF
Description
Sets and then displays the type of paper that is loaded in
drawers[cassettes] No.1 through No.5.
* The drawer[cassette] No.5 setting will only be
displayed when the optional Side Feeder, which is only
available for 55 cpm copiers, is installed on your
copier.
Sets whether or not each custom paper type (custom 1 -
custom 8) will be available for use in
2-sided copying.
Sets the amount of time that will elapse after copying, or
if no operation is performed, before the auto shut-off
function engages and turns the copier OFF.
* It is recommended that you try to set a longer time
interval before auto shut-off engages if you use the
copier frequently, and to a shorter time if there are long
intervals between use.
Sets the amount of time between the point that copying
ends and the energy-saving preheat mode engages.
Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
Document Finisher or Multi Job Tray is installed on
your copier.
Sets whether or not the touch panel will emit a “beep”
sound each time a key is touched.
The copier can be switched to a silent mode, which
shortens the length of time that the laser data writing
motor continues to spin after each copy job is finished.
Turn the silent mode ON if the noise of the motor
bothers you in any way.
Available
settings
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
On / Off
15 – 240 (minutes)
1 – 45 (minutes)
Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
On / Off
On / Off
Factory
setting
Plain
On
90 (minutes)
15 (minutes)
Tray A
On
Off
Reference
page
7-24
7-25
7-25
7-26
7-27
7-28
7-29