TA Triumph-Adler DC 2045 - Manual (Page 202)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-68
6. Hard disk management
Perform the following procedure to access the “Storage Management”
screen and check available space on the hard disk and/or delete any
invalid data.
1 With the content of the “Basic” tab displayed, press the [ ]
key. The “Default setting” screen will be displayed.
2 Touch the “BOX Management”[“Hard Disk Management”] key.
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
Form
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
Form
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 45 cpm copiers is “4500” and
for 55 cpm copiers is “5500”.If the entered code matched the
registered one, the “HDD Management mode” [“HDD
Management”] screen will be displayed.
Inch specifications
Enter the administrator number Close
Metric specifications
Enter the administrator number Close
4 The overall size of the hard disk, as well as the currently
available space will be displayed.If you want to delete any
invalid data, go to the next step.If you are finished with this
procedure, go directly to step 6.
Inch specifications
HDD management mode
HDD management mode
Item Setting mode
On
Close
Free Space
Capacity
Default setting
06,084 MB
06,187 MB
Delete invalid data
Delete invalid data in the HDD.
Metric specifications
HDD management mode
HDD management
Item Setting mode
On
Close
Free Space
Cpapcty
Default setting
0 MB
0 MB
Delete invalid data
Delete invalid deta from the HDD.
5 Touch the “On” key. The operation to delete invalid data will
start. Once the operation is completed, the touch panel will
return to the screen in step 4.
6 Touch the “Close” key. The touch panel will return to the
screen in step 2.Touch the “End” key. The touch panel will
return to the contents of the “Basic” tab.
→ →