TA Triumph-Adler DC 2045 - Manual (Page 115)

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
6-3
4 Check the displayed information.
If you want to print out the selected form, touch the “Print
Form” key.
If you want to change the name of the selected form, touch
the “Change form name” key and then enter the new name.
Inch specifications
Check/Correct details
Document name
Size
Input source
Resolution
Registration date
Default menu Setting mode
Change
form name
Print
Form
Close
Document Management - Form box - Box editting
Form 001
11x17"
Copy
1200dpi
25/10/'01 14:06
Metric specifications
Check/revice details
Document name
Size
Input source
Resolution
Registration date
Default menu Setting mode
Change
form name
Print
Form
Close
Document Management - Form box - Box editting
FORM007
A4
Copy
'25/10/01 14:06
1200dpi
NOTE
Refer to “Entering characters” on page 7-72 for information on
entering characters.
5 Once you have finished checking the information for that
form, touch the “Close” key. The touch panel will return to the
screen in step 3.
If you want to check the information for another registered
form, repeat steps 3 through 5.
6 Touch the “Close” key once again. The touch panel will return
to the screen in step 2.
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.
3 Deleting a registered form
Perform the following procedure when you want to delete a registered
form.
1 Press the [Document Management] key. The “Document
Management” screen will be displayed.
2 Touch the “Box Edittig” [“Box Edittig”] key under “Form Box”.
The “Box editting” screen will be displayed.
Inch specifications
Select function.
Document Management End
Shared Data Box Synergy Print Box Form box
Document
reg. Document
printing Document
reg. Document
printing Form
reg.
Box
Edittig Box
Edittig Box
Edittig
25/10/'01 19:20
Metric specifications
Select function.
Document Management
25/10/'01 19:20
End
Shared Data Box Synergy Print Box Form box
Document
registr. Document
printing Document
printing Document
registr. Form
registr.
Box
Editting Box
Editting Box
Editting
3 Select the form that you want to delete and then touch the
“Delete” key. A verification screen will be displayed.
Inch specifications
Box editting
Form 005
Form 004
Form 003
Form 002
Form 001
Form
Up
Delete
Close
Document Management - Form box
Down
Order of
indication
Conf/Crrt.
details 01/04/19
01/04/19
01/04/19
01/04/19
01/04/19
001/005
11x8 1 / 2 "
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Box editting
Form 007
Form 006
Form 005
Form 004
Form 003
Form Up
Delete
Close
Document Management - Form box
Down
Order of
indication
Check/Rev.
details
A4
A4
A4
A4
A4
25/10/01
25/10/01
25/10/01
25/10/01
25/10/01
001/007
→ →