TA Triumph-Adler DC 2045 - Manual (Page 28)

Section 3 PREPARATIONS
3-8
Add toner when “Add toner” is displayed. Although a few copies can
still be made once this message is displayed, you should add toner as
soon as possible.
* DO NOT add toner unless this message is displayed.
* Touch the “Adding toner” key to have the procedure for adding toner
displayed on the touch panel.
1 Open the cover on the right side of the operation panel.
3. Adding toner
Combine
Orig. image
quality
Reduce
/Enlarge
Basic User choice
APS
Bypass
Ready to copy. Set Paper size
1 sided
R 2 sided
1 sided
R 1 sided
2 sided/
Separation
Program Function
Reduce
/Enlarge
AMS
Exposure
Auto
Exposure
Add toner.
Adding
toner
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Combine
Orig. quality
Reduce
/Enlarge
Basic User choice
APS
Bypass
Ready to copy. Set Paper Size
1 sided
R 2 sided
1 sided
R 1 sided
2 sided/
Separation
Program Function
Color
Recycled
Plain
Plain
Reduce
/Enlarge
AMS
Exposure
Add toner.
Adding
toner
Auto
Exposure
Inch specifications
Metric specifications
CAUTION
DO NOT attempt to incinerate the toner bottle or the
waste toner box. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
bottle or the waste toner box.
2 Turn the new toner bottle upside down and tap the bottom
portion about 10 times or so.
3 Hold the bottle firmly and shake up the contents by turning it
upside down and then right-side up 10 or more times in the
manner shown in the illustration.
4 Next, hold the bottle horizontally and shake it back and forth
10 or more times.
5 Fit the hole in the toner bottle (located below the ▼ ) over the
metal pin (shown as 1 in the illustration) that is protruding
out of the toner supply slot.