TA Triumph-Adler DC 2045 - Manual (Page 154)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-20
Default setting
Day & time
Time difference
Changing the
management code
Auto shut-off ON/OFF
Description
Sets the current date and time.
Sets a designated time difference.
Changes the management code that is used by the copy
manager.
IMPORTANT:
If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact
your service representative.
Sets whether or not to have the auto shut-off function
automatically turn the main switch OFF a certain amount
of time after copying, or if no operation has been
performed on the copier during that time.
* If auto shut-off interferes with your copying operations,
turn this function OFF. However, it is recommended
that you try to set a longer time interval until auto shut-
off engages before you actually turn it OFF.
Available
settings
Year: 2000-2099
Month: 1 – 12
Day: 1 – 31
Time: 00:00 – 23:59
+12:00 – -12:00
0000 – 9999
On / Off
Factory
setting
Year: ‘00
Month: 01
Day: 01
Time: 00:00
00:00
45 cpm copiers:
4500
55 cpm copiers:
5500
On
Reference
page
7-29
7-30
7-31
7-32