TA Triumph-Adler DC 2015 - Manual (Page 6)

ii
● MAKING FULL USE OF THE MACHINE’S ADVANCED FUNCTIONS
1 2
7 8 9
3 4 5
10
6
11
Having the machine automati-
cally select paper of the same
size as the original
(page 4-1)
* This mode is not available
on some models.
Various functions for making
enlarged and reduced copies
■ Enlarging/reducing copies
to fit the size of paper in a
specified drawer
selection mode> (page 4-3)
■ Enlarging/reducing copies to
any desired size in the 50 -
200% range.
(page 4-3)
■ Specifying the magnification by
selecting the paper size
(page 4-4)
Making clear reproductions
of photographs
(page 4-2) Making a margin on copies
(page 5-1)
* When the optional memory
board is installed.
Making copies with clean edges
(page 5-2)
* When the optional memory
board is installed.
Making one copy from two or
four originals
(page 5-4)
* When the optional memory
board is installed.
Sorting automatically
(page 5-6)
* When the optional memory
board is installed.
Changing copy orientation for
easy sorting
(page 5-6)
* When the optional memory
board is installed.
Making copies from originals of
different sizes at a time
(page 7-2)
* When the optional ADF is
installed.
Managing the number of
copies by ID-code
(page 6-1)
A full range of optional
equipment is available
■ ADF (automatic document
feeder) (page 7-1)
■ Drawer (page 7-3) ■ Job separator (page 7-3) ■ Key counter (page 7-3)
■ Memory board (page 7-4)
■ Printer board (page 7-4)
■ Printer network board
(page 7-4)