TA Triumph-Adler DC 2015 - Manual (Page 32)

6-1
CHAPTER 6 COPIER MANAGEMENT
1. Copy management
The total number of copies made by each department can be managed using 4-digit codes for up to 100 departments.
(1) Copy management modes
Setting codes are provided for the copy management modes that have selection items. Only the number of the setting code appears on the copy
quantity display. See the "Setting code" column in the table below for the meanings of those numbers. Initial settings are indicated with an asterisk
(
* ).
d01 Turning copy management
ON/OFF Turn copy management ON when required (to apply the settings
made). Turn it OFF when not required. 1: Copy management ON
2: Copy management OFF
*
d02 Registering ID-codes Assigns a 4-digit ID-code. Up to 100 ID-codes can be registered.
d03 Deleting ID-codes Deletes the ID-codes that are no longer needed.
d04 Clearing copy counts Clears all the copy counts for the various departments after a suitable
period of time. Copy counts cannot be cleared individually. 1: Clear
2: Do not clear
*
d05 Printing copy management list Prints the number of copies made by ID-code.
Mode
code
Copy management mode Mode content Setting code