TA Triumph-Adler DC 2015 - Manual (Page 35)

CHAPTER 6 COPIER MANAGEMENT
6-4
The state the copier is in at the end of warm-up or when the Reset key is pressed is called the initial mode, and the function settings that are
automatically set for the initial mode are called the default settings. The default settings can be changed according to how you wish to use the copier.
(1) Default settings
Setting codes are provided for the default setting items that have selection items. Only the number of the setting code appears on the copy uantity
display. See the "Setting code" column in the table below for the meanings of those numbers. Initial settings are indicated with an asterisk (
* ).
F01 User status report Prints the details of the default settings.
F02 Exposure mode Selects the image mode at power-on. 1: Auto Exposure
2: Text & Photo
*
3: Photo
4: Text
F03 Exposure steps Changes the number of exposure steps for the manual
exposure mode. 1: 5 steps *
2: 9 steps
F04 Auto exposure adjustment Adjusts the overall exposure when using the auto exposure
mode. The larger the setting code number, the darker the
copy density. 1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
F05 Text and photo original exposure
adjustment Adjusts the exposure for when text and photo original is
selected for the image mode. The larger the setting code
number, the darker the copy density. 1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
Default code Setting item Setting contents Setting code
2. Default settings