TA Triumph-Adler DC 2015 - Manual (Page 36)

CHAPTER 6 COPIER MANAGEMENT
6-5
Default code Setting item Setting contents Setting code
F06 Text original exposure adjust-
ment Adjusts the exposure for when text original is selected for the
image mode. The larger the setting code number, the darker
the copy density. 1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
F07 Photo original exposure
adjustment Adjusts the exposure for when photo original is selected for
the image mode. The larger the setting code number, the
darker the copy density. 1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
F08 Paper selection Specifies whether the drawer with paper of the same size as
the original is automatically selected or paper size is
selected manually. 1: Auto *
2: Manual
F09 Auto magnification selection
mode Sets whether to enlarge/reduce the image of the original
(see "Auto magnification selection mode" on page 4-3.)or
copy it at the same size when an original has been set and
the Paper Select key pressed. 1: Auto magnification
selection *
2: Same size
F10 Default drawer Specifies the paper feed drawer to be selected automatically
when warm-up ends or when the Reset key is pressed.
* This setting item will not be displayed if no optional drawer
is installed.
1: Drawer 1 *
2: Drawer 2
3: Drawer 3
4: Drawer 4
F11 Automatic drawer switching Sets whether or not to use the automatic drawer switching
function (see page 2-4). 1: ON *
2: OFF
F12 Multi-bypass paper size Sets the paper size for the multi-bypass to make it available
for the automatic paper selection function (the paper size for
the multi-bypass will be fixed). 1: A3
2: A4 (vertical)
3: A4
4: B4
5: B5 (vertical)
6: B5
7: Folio
8: U (no size setting)
Setting value of the non
standard size paper width
for the multi-bypass