TA Triumph-Adler 206ci User Manual

Page 328

10-12

Troubleshooting > Solving Malfunctions

Part of the image is
periodically faint or blurred.

—

Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting], [MC] and decrease the
adjustment value. Decrease the
adjustment value 1 level at a time from
the current value. If there is no
improvement after the value is
decreased by 1 level, decrease by 1
level again. If there is still no
improvement, return the setting to the
original value.

—

Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting], [DEV-CLN], and then press [Start].

—

Irregular horizontal lines
appear in the image.

—

The altitude is 1500 m or
higher and irregular
horizontal white lines appear
in the image.

—

Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting], [Altitude Adjustment] and
change the adjustment value. Increase
the adjustment value 1 level at a time
from the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1
level again.

—

The altitude is 1500 m or
higher and dots appear in the
image.

—

Colors appear different than
you anticipated.

Did you choose appropriate image
quality for the original?

Select appropriate image quality.

3-53

Have you loaded color copy paper into
the paper tray?

Load color copy paper into the paper
tray.

—

Run [Calibration].

9-27