TA Triumph-Adler P-4030D - Manual (Page 95)

4-35
Operation Panel
• Custom Paper Settings...4-36
Setting the Paper Thickness
You can set the paper thickness by selecting a paper weight.
The available paper weights are as follows:
• Extra Heavy
• Heavy 3
• Heavy 2
• Heavy 1
• Normal 3
• Normal 2
• Normal 1
• Light
The default setting is Normal 2 for plain paper. When using any paper other than plain paper, you should change the paper
weight referring to the table below to achieve the best possible print quality for each paper.
Use the procedure below to set the paper weight.
(For the procedure for setting weights for custom paper (CUSTOM 1 to 8), refer to Custom Paper Settings on page 4-36.)
1
In the Paper Settings menu, press  or  to select Media Type
Set..
2
Press [OK]. The Media Type Set. screen appears listing the
media types that can used with the printer.
3
Press  or  to select the media type for which you want to set the
paper weight.
Note Depending on the type of paper, the toner may not adhere to the paper properly. To solve this problem, select
the half speed mode from the printer driver. For more information, refer to Half Speed Mode (Printer Driver
Settings) on page 3-6.
Media Type Paper Weight Media Type Paper Weight
Plain Normal 2 Letterhead Normal 3
Transparency Extra Heavy Color Normal 3
Preprinted Normal 2 Prepunched Normal 2
Labels Heavy 1 Envelope Heavy 3
Bond Normal 3 Cardstock Heavy 3
Recycled Normal 2 Thick Heavy 3
Vellum Light HighQuality Normal 2
Rough Normal 3 CUSTOM 1 to 8 Normal 2
Media Type Set.: a b
********************-
2 Transparency
3 Preprinted
[ Exit ]
1 Plain