TA Triumph-Adler P-4030D - Manual (Page 124)

Operation Panel
4-64
3
Press  or . The NetwkName(SSID) is displayed.
If the entire name shown as the NetwkName(SSID)will not fit on one
line, pressing [Detail] ([Right Select]) changes to a 3-line name
display.
Quick Setup (Quick setup for the wireless network)
When connecting to an access point which supports the automatic wireless network setup, you can select the connection
settings using Quick Setup.
1
In the Wireless Network menu, press  or  to select Quick
Setup.
2
Press [OK]. The Quick Setup menu screen appears.
The following operations are possible:
• AvailableNetwork (Display the access points)
• Push Button (Connect using Push Button)
• PIN (Device) (Connect using a PIN code (for the wireless network
interface kit))
• PIN (Terminal) (Connect using a PIN code (for the access point)
AvailableNetwork (Display the access points)
Displays the access points which can be connected to.
1
In the Quick Setup menu, press  or  to AvailableNetwork.
2
Press [OK]. The AvailableNetwork screen appears.
3
Press  or  to select the access point to connect to.
4
Press [OK]. The connection with the access point is started.
When it is necessary to enter an encryption key, the WEP Key entry
screen or Preshared Key entry screen appears.
When a WEP Key must be entered:
Enter the WEP Key using the numeric keys and press [OK].
ConnectionStatus: P b
NetwkName(SSID): 2/2
AAAA
[ Detail ]
Detail: O b
ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnop
qrstuvwxyz1234567890
Quick Setup: a b
********************-
2 Push Button
3 PIN (Device)
[ Exit ]
1 AvailableNetwork
Note If you cannot find the desired access point, press
[Reload] ([Right Select]) to update the information.
Up to 26 characters can be entered. For details on entering
characters, refer to Character Entry Method on page A-2.
AvailableNetwork: a b
********************-
AccessPoint_002
AccessPoint_003
[ Reload ]
AccessPoint 001
WEP Key: a b
00000000
ABC
[ Text ]