TA Triumph-Adler P-4030D User Manual
Page 128
Operation Panel
4-68
2
Press [OK]. The Encryption screen appears.
The following operations are possible:
• Data Encryption (Data Encryption setting)...4-68
• WEP Key (WEP Key settings)...4-68
• Preshared Key (Preshared Key settings)...4-69
Data Encryption (Data Encryption setting)
This sets the encryption method.
1
In the Encryption menu, press or to select Data
Encryption.
2
Press [OK]. The Data Encryption screen appears.
3
Press or to select the desired encryption method.
4
Press [OK]. The Encryption menu reappears.
WEP Key (WEP Key settings)
This registers the WEP Key.
1
In the Encryption menu, press or to select WEP Key.
2
Press [OK]. The WEP Key screen appears.
3
Press[Edit] ([Right Select]). The WEP Key entry screen appears.
4
Enter the WEP Key using the numeric keys.
5
Press [OK]. The Encryption menu reappears.
Note WEP Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to Open
or Shared.
Preshared Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to WPA-
PSK or WPA2-PSK.
Encryption:
a
b
********************-
2 WEP
Key
[ Exit
]
1 Data Encryption
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 4-67.
Disable or WEP can be selected when Open or Shared is
set.
TKIP, AES or Auto can be selected when WPA-PSK is set.
AES can be selected when WPA2-PSK is set.
Data Encryption: a
b
********************-
2 WEP
1
*Disable
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
WEP Key:
a
b
-----
[ Edit
]
WEP Key:
a
b
*
S
ABC
[ Text
]