RIGOL DS6000 Series - Manual (Page 59)

RIGOL
RP1003C/RP1004C/RP1005C User’s Guide 15
and closing the current sensor.
11. When the frequency of the input signal is relatively high, the
common mode voltage range corresponding to the signal
measured by the current probe reduces. At this point, connect
the current probe to the low-voltage side of the circuit, as
shown in the figures on the next page.
RP1003C and RP1004C:
RP1005C:
Low
Signal
Source Load
√
High ×
√
Load
×
Low
High
Signal
Source