RIGOL DS6000 Series - Manual (Page 48)

RIGOL
4 RP1003C/RP1004C/RP1005C User’s Guide
RP1005C Parts Overview
Figure 3 RP1005C Parts
1． Slide Switch
It is used to open and lock the current sensor. You are
recommended to lock the current sensor when measuring the
conductor to be measured to avoid danger.
For RP1003C and RP1004C, there are OPEN, FREE and LOCK
indications on one side of the slide switch. The on/off status
of the current sensor is related to the position of the slide
switch.
 When the slide switch is at the OPEN position, the current
sensor is open and at this point, the conductor to be
measured can be connected to the current sensor;
 When the slide switch is at the FREE position, the current
Current Direction
Indication
On/Off Indication
Terminator
Power Supply
Cable
Sensor Cable
2
7
4
3
1
6
Gain