To use the current probe, Measurement preparations – RIGOL DS6000 Series User Manual
Page 51
RIGOL
RP1003C/RP1004C/RP1005C User’s Guide
7
7． Power Plug
Connect the power plug to the corresponding receptacle of
the power adaptor to supply power to the current probe
terminator.
Note: To avoid electric shock, do not touch the portion
beyond the protective barrier during use.
To Use the Current Probe
Before using the current probe to measure the current of the
device under measurement, make measurement preparations and
perform demagnetizing and zero adjustment. Then, make
measurements according to the method described in
Measurement Steps.
Note: You are recommended to read the Precautions during
Measurements before making measurements to avoid
unnecessary loss.
Measurement Preparations
1. Connect the power plug of the current probe to the power
adaptor.
Power Indicator