Appendix a: why your system does not arm – RISCO Group ProSYS 128 User Manual
Page 37
Access Control User's Manual 37
Appendix A: Why Your System Does Not
Arm
If you do not succeed in arming the system, check that all the
following criteria are met:
The partitions you want to arm are in Ready mode.
REMEMBER:
Only the common partitions of the access user, the door partition
definitions, and the security user partition definitions will be armed.
The user is defined as an Arm/Disarm user.
The user is defined to the correct access group.
REMEMBER:
In order to define an access group, you must first define a weekly program
and assign it to a door.
The use of the card/code is in the authorized access time
window.
The correct arm code has been entered. (Ask your Installer
for the default code, if required.)
The correct PIN code has been entered.
The reader is authorized for the arming operation.