RISCO Group ProSYS 128 - Manual (Page 22)

22 Access Control User's Manual
7)
TIME WINDOW 01
STOP2 00:00
TIME WINDOW 01
STOP2 00:00
Enter the stop time of the second
time interval and press
.
8)
T. WINDOW LABEL T. WINDOW LABEL
Enter a logical name for the time
window and press
.
9)
TIME WINDOW 01
IS DEFINED
TIME WINDOW 01
IS DEFINED
This message indicates that the time
window has been defined
successfully.
Defining Weekly Programs 6 6 8 8 CODE CODE # # 2 2 2 2
The weekly program option enables you to define weekly
programs for each group of users. Each weekly program is
comprised of seven separate time windows and one holiday
time window that you select, which then determine the days and
time intervals during which each group has access to the system.
The time window that you select for the holiday time window
determines how the permissions for the assigned access group
will act once the system goes into holiday mode.
NOTES:
Before defining weekly programs, you must first define the time windows, as
described in the previous section.
Weekly programs are required when you define access groups, as described in
Configuring Access Groups, page 24.
You can define up to 25 weekly programs. For example, you can
create a weekly program named Markt Weekly that consists of
the Markt Personnel time window for Monday through Thursday;
the Half Day Work time window for Friday; and the Never time
window for weekends and holidays, as shown in the table below.
ID Name Mon Tue Wed Thu Fri Sat Sun Hol
1 Markt
Weekly
1 1 1 1 2 00 00 00
2 Cleaning
Night
3 3 3 3 2 00 00 00
x Time Window 1: Markt Personnel
x Time Window 2: Half Day Work
x Time Window 00: Never
When performing this procedure, use the data that you
prepared in Table 4: Weekly Programs, page 41.