Oki ColorPainter E-64s - Manual (Page 36)

4-16
CP_Manager Instruction manual
„ About the e-mail and tweet functions
Information about a print job progress and the printer status can be notified to a computer or a mobile device via e-mail
or using Twitter.
Via Twitter, you can also remotely operate the printer from a computer or a mobile device.
E-mail addresses and accounts on Twitter must be available to use these functions.
To use the e-mail function the following two addresses (accounts) are necessary.
- An address to be used by CP_Manager
- An address that will receive the e-mail notifications
To use the tweet function the following two Twitter usernames (accounts) are necessary.
- A username to be used by CP_Manager
- A username to receive the notifications and to remotely operate the printer
Note
Moreover, to be able to receive the notifications on Twitter, the account that will receive them must be set in
advance on Twitter as a follower of the account used by CP_Manager. (To follow the other account, the settings
must be made on CP_Manager.)
Notification
Remote operation
Notification by direct message
Twitter: @bbbb
mail: [email protected]
Twitter: @aaaa
mail: [email protected]
E-mail address for
CP_Manager
Username of the account
used for CP_Manager
E-mail address that receives
the notifications
Username of the account used to receive
the notifications and for remote operation
* To use the tweet and e-mail functions, the computer running CP_Manager must be connected to the Internet. You will not be
able to use these functions without a connection to the Internet or if the access to the e-mail server or Twitter is restricted by a
firewall on the network.
* For CP_Manager, use one of the following types of e-mail address.
(1) A Google mail address
(2) An e-mail address on a server supporting SMTP.
The e-mail service provider must provide SMTP server information. Confirm with your e-mail service provider.
* The notification and remote operation functions cannot be used when the computer running CP_Manager is sleeping or
hibernating.
Chapter 4. Printer setting area