Oki ColorPainter E-64s - Manual (Page 26)

4-6
CP_Manager Instruction manual
Chapter 4. Printer setting area
Media adjustment
Adjustment can be made for each media used.
(1) Preset No., Media name: Number and name of the media for which adjustment is performed.
(2) PH Height: Menu used when changing the height of the print heads.
(3) Notification field for print head height
change:
You are notified of the need to change the height of the print heads in this field
when the print head height configured in the media preset does not match the
print head height configured in the printer.
(4) Change Print Head Height button: Button used to change the height of the print heads.
(5) Information on print head height setting: Displays the height setting for the print heads in the preset of the media that is being
adjusted.
(6) Media Advance: Menu used to perform media advance adjustment.
(7) Notification field for media advance
adjustment:
You are notified of the need to perform media advance adjustment in this field.
(8) Automatic Adjustment button: Button used to execute automatic media advance adjustment.
With automatic media advance adjustment, the adjustment value is set
automatically.
(9) Print buttons for manual media advance
adjustment patterns:
Buttons used to print media advance adjustment patterns.
The patterns are printed based on the adjustment value set in (10).
Check the print results visually. If the print output is still misaligned, change the
adjustment value and print the adjustment patterns again.
*After changing the adjustment value in (10), you must apply the setting with the
update settings button (20) before printing the patterns.
(10) Input field for media advance adjustment
value:
Field used to input the media advance adjustment value.
After changing the adjustment value, apply the setting with the update settings
button (20).
(11) Bidirectional Adj: Menu used to perform bidirectional adjustment.
(12) Carriage speeds: Menus used to configure bidirectional adjustment with normal and slow carriage
speeds.
(13) Notification fields for bidirectional
adjustment:
You are notified of the need to perform bidirectional adjustment in these fields.
The need to perform adjustment is displayed for each carriage speed.
(14) Automatic Adjustment buttons: Buttons used to perform automatic bidirectional adjustment.
With automatic bidirectional adjustment, the adjustment value is set automatically.
(1)
(5)
(11)
(13)
(13)
(6)
(7)
(12)
(12)
(14)
(14)
(15)
(15)
(19)
(16)
(18)
(18)
(20)
(17)
(17)
(2)
(3)
(4)
(8)
(10)
(9)