MCZ Tube 2013 - Manual (Page 36)

34
8-EMERGENCY PANEL
EMERGENCY PANEL
There is an emergency panel on the product side, designed for any malfunction to be detected and product control if the remote control
should malfunction.
KEY
A
Three-digit display that indicates a variety of product information besides the identification code of any malfunction.
B
GREEN LED that indicates:
• OFF = The product is off
• FLASHING ON = The product is starting up
• FIXED ON = The product is on
C
RED LED that indicates:
• OFF = The product is on
• ON AND FLASHING SLOWLY = The product is shutting down
• ON AND FLASHING QUICKLY = The product is in alarm status (accompanied by a buzzer for the first 10 minutes)
• FIXED ON = The product is off
D
3-position selector for the following functions:
• OFF = The product is switched off manually without the remote control
• REMOTE = The product can only be controlled via remote control
• ON = The product is switched on manually without the remote control
E
3-position selector for the power selection:
• MIN = The product runs at MINIMUM power without the remote control and with selector 4 set to ON
• MED = The product runs at MEDIUM power without the remote control and with selector 4 set to ON
• MAX = The product runs at MAXIMUM power without the remote control and with selector 4 set to ON
F
Button for diagnostic functions regarding the product operation mode
G
Button to connect the product to a new remote control
SELECTOR "D" MUST BE SET TO THE "REMOTE" POSITION FOR THE PRODUCT TO BE REMOTE CONTROLLED.