MCZ Tube 2013 - Manual (Page 18)

16
5-INSTALLATION AND ASSEMBLY
TECHNICAL CHARACTERISTICS TUBE - COMFORT AIR model
Nominal thermal power 8 kW (6880 kcal/h)
Minimal thermal power 2,4 kW (2064 kcal/h)
Efficiency at Max 91,7%
Efficiency at Min 94,1%
Temperature of exhaust smoke at Max 170°C
Temperature of exhaust smoke at Min 100 °C
Particulate/OGC/Nox (13%O
2
) 22 mg/Nm 3 - 6 mg/Nm 3 - 123 mg/Nm 3
CO at 13% O
2
at Min and at Max 0,025 – 0,014%
CO
2
at Min and at Max 5,7% - 8,7%
Recommended draught at Max power 0.10 mbar - 10 Pa***
Recommended draught at Min power 0.00 mbar - 0 Pa
Mass of smoke 6.6 g/sec
Hopper capacity 32 litres
Type of pellet fuel Pellet diameter 6-8 mm. and size 5/30 mm
Pellet hourly consumption Min ~ 0.6 kg/h* - Max ~ 1.8 kg/h*
Autonomy At min ~ 40 h* - At max ~ 13 h*
Heatable volume m 3 172/40 – 196/35 – 229/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm 2
Nominal electrical power (EN 60335-1) 100 W (Max 420 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 130 kg
Weight with packaging 140 kg
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m 3 (respectively 40-35-30 Kcal/h per m 3 )
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).