Extron Electronics CVEQ 100 Series - Manual (Page 25)

CVEQ 100 and SVEQ 100 Series • Specifications and Parts
Specifications, Part Numbers, Accessories, cont’d
CVEQ 100 and SVEQ 100 Series • Specifications and Parts A-4 A-5
Audio output
Number/signal type
CVEQ 100, SVEQ 100 ........ 1 stereo, balanced/unbalanced
All other models ................ 1 stereo or dual mono (switch-selectable),
balanced/unbalanced
Connectors ..................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level ................................ -10 dBV (316 mVrms), unbalanced; -2 dBu
(632 mV), balanced output
Maximum level .............................. +9 dBV (2.8 V) unbalanced, +17 dBu (5.6
V) balanced at 1% THD+N with a 10k ohm
load
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 2 A, regulated
Power input requirements ........... 12 VDC, 0.2 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, no vents
Mounting
Rack mount
CVEQ 100, SVEQ 100 Yes, with optional 1U, 9.5" deep rack shelf
(RSU 129 or 60-190-03;
RSB 129, 60-604-01); or 1U, 6" deep rack
shelf (RSU 126, #60-190-10;
RSB 126, 60-604-10); or VersaTools
® 3.5"
deep rack shelf (RSF 123, #60-190-20;
RSB 129, 60-604-20).
All other models ........ No, but wall or furniture mountable
Furniture mount
CVEQ 100, SVEQ 100 Yes, with optional mounting kits
CVEQ 100 D, SVEQ 100 D
Yes, directly, or with a standard electrical
wall box or mud ring
All other models ........ Yes, with optional AAP or MAAP
mounting faceplates
Enclosure type
CVEQ 100, SVEQ 100 ........ Metal
CVEQ 100 D, SVEQ 100 D . Metal rear enclosure, plastic faceplate
CVEQ 100 AAP, SVEQ 100 AAP
Metal faceplate, open at rear
CVEQ 100 MAAP, SVEQ 100 MAAP
Metal faceplate, metal rear enclosure
Enclosure dimensions
CVEQ 100 ........................... 1.0" H x 4.3" W x 3.0" D (<1U high, quarter
rack wide)
(2.5 cm H x 11.0 cm W x 7.6 cm D)
(Depth excludes connectors. )
SVEQ 100 ............................ 1.7" H x 4.3" W x 3.0" D (1U high, quarter
rack wide)
(4.3 cm H x 11.0 cm W x 7.6 cm D)
(Depth excludes connectors. )
CVEQ 100 D, SVEQ 100 D
Faceplate ..................... 2.6" H x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate. *Height is 3.8" [9.5 cm],
including mounting tabs.)
(Depth excludes connectors. )
Device ......................... 2.7" H x 1.8" W x 0.75" D
(6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors; height
excludes mounting tabs.)
CVEQ 100 AAP, SVEQ 100 AAP
Faceplate ..................... 1.4" H x 3.5" W x 0.1" D
(3.6 cm H x 7.1 cm W x 0.3 cm D)
(double space high AAP plate)
Device ......................... 1.1" H x 2.8 " W x 1.2" D
(2.8 cm H x 7.0 cm W x 3.0 cm D)
(Depth excludes connectors.)
CVEQ 100 MAAP, SVEQ 100 MAAP
Faceplate ..................... 2.1" H x 2.2" W x -.1" D
(5.3 cm H x 5.7 cm W x 0.3 cm D)
(three space MAAP plate)
Device ......................... 2.0" H x 1.4" W x 1.2: D
(5 cm H x 3.6 cm W x 3.0 cm D)
(Depth excludes connectors.)
Product weight
CVEQ 100, SVEQ 100 ........ 0.7 lbs (0.3 kg)
All other models ................ 0.2 lbs (0.1 kg)